EasyManua.ls Logo

Benchmark BM Series - Adding Engine Oil

Benchmark BM Series
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
TM
3.8 ADD ENGINE OIL
WARNING!
Used motor oil can cause skin irritations if left in long-term
contact with skin. Thoroughly wash off used oil as soon as
possible with soap and water.
1. Ensure the lawn mower is on a level surface.
2. Unscrew one of the oil dipsticks and clean the dipstick.
3. Check the oil level by reinserting the oil dipstick without screwing it back in.
Remove the dipstick and examine the oil level. If the level is at or below
the minimum oil level marked on the dipstick, rell to the maximum oil level
mark.
4. Reinsert the dipstick and tighten securely.
NOTE
Oil max. capacity:
BM1740: 400 mL
BW2050E: 400 mL
SAE10W-30 oil is recommended for general use.
Oil Dipstick
Cutting Height
Adjusting Handle
Maximum Oil Level
Minimum Oil Level

Table of Contents

Related product manuals