.
Explanation of symbols and notes
The following designations and symbols for hazards and
warnings are used in BENDER documentation.
This symbol means a possible threat of danger to the
life and health of human beings.
• Failure to comply with these warnings means that
death, serious physical injury or substantial damage
to property may ensue if the relevant precautions
are not taken.
This symbol means a possible dangerous situation.
• Failure to comply with these warnings means that
slight physical injury or damage to property may
ensue if the relevant precautions are not taken.
This symbol gives important information about the
correct handling of the LIM.
• Failure to comply with this information can result in
faults on the LIM or in its environment.
Where you see this symbol, you will find application
hints and other particularly useful information.
• This information will help you to make an optimal
use of the LIM.
1. Safety Information
1.8 Directions of installation
1. Safety Information
8
9
To Next Page
Loading...
