To Next Page
R
Robert HansonAug 8, 2025
What to do if Bender Monitor shows a device error display (channel-related)?
- RRichard GuzmanAug 8, 2025
If your Bender Monitor displays a channel-related device error, it could be due to several reasons: * W…AB series measuring current transformers are not calibrated. * Incorrect basic programming of the RCMS. * Wrong p.c.b. assembly at four channels in succession. * Internal memory fault. * Faulty channels after the test. The device errors remain saved until the "RESET" button is pressed. If the device error continues after a reset, the RCMS… has to be replaced.
General
