21
RCMS460-490_D00067_03_M_XXEN/12.2017
4. Installation and connection
4.1 Unpacking
Unpack all the parts supplied with the system. Avoid sharp-edged tools
that may damage the content of the packaging.
Compare
your order with our delivery note to check that you have
received all products in full. The article numbers and type designation
printed on the nameplates provides an easy means of uniquely identifying
each device.
Check all parts supplied for any evidence of damage in transit. Equip-
ment damaged in transit must not be used. If a device has sustained
damage, please contact Bender. Details of who to contact are indicated
on the delivery documents.
When storing the devices in a cold environment as it is in winter, note
the following: Leave the devices to stand for 3 to 4 hours at room tem-
perature before connecting the power supply. When the devices are
moved from a cold to a warm environment, condensation will be evi-
dent on all parts. Putting damp devices into operation can result in
damage to electrical components and electric shock in case of contact.
To Next Page
Loading...
Need help?
General
