Operation
73
RCMS460-490_D00067_03_M_XXEN/12.2017
6.6.6.11 Settings menu 11: Password
Change, activate/deactivate password.
1. Password
Change password. Factory setting: 000
2. Status
Activate or deactivate password protection.
6.6.6.12 Settings menu 12: Factory settings
Resets every setting to its factory setting. Factory settings are given in paren-
theses „( )*“ in the technical data.
6.6.6.13 Settings menu 13: Service
This menu is intended for Bender service employees only.
Settings can be password protected. If the password is
activated (enabled), all settings continue to be displayed.
When an attempt is made to change settings, the password
entry screen appears automatically:
Once a valid password has been entered, access will be
granted to settings in all menus (except the Service menu)
until menu mode is exited.
If you can't remember your password, contact the Bender
Service.
To Next Page
Loading...
