Bender RCMS460 - Settings Menu 4: Relay

Operation
68
RCMS460-490_D00067_03_M_XXEN/12.2017
6.6.6.4 Settings menu 4: Relay
In this menu, you set the common alarm relays K1 (C11, C12, C14) and K2 (C21,
C22, C24), either individually or both alarm relays. Select the relay:
1. Use the "" button to go to the relay channel setting. Press the "↵"
button.
2. Use the Up/Down buttons to select a relay (1, 2) or both relays (1…2).
Press "↵" to confirm your selection.
Relay: 1
Exit
1.Mode of opera-
tion:N/O
Set a
single relay:
Relay: 1..2
Exit
1.Op.mode
2.Alarm: --
Set both
relays: