SET-UP & OPERATION
Setting the braking force:
To set the brake intensity, simply rotate the dial until the
required braking level is achieved. A clockwise dial rotation will
increase the braking and a counter-clockwise will decrease it.
Using the override feature:
To activate the override function, simply push on the adjustment
dial. Releasing the dial disables the function.
NOTE: when the override is active, the braking force is still
determined by the dial position.
The override function works to apply the trailer brakes without
applying the vehicle brakes. This feature can be used when
the tow vehicle begins to sway or enter a tail wag situation.
Please consult towing professionals or towing training schools
for advice on how to use this feature correctly. In the event of
an emergency situation, do not rely on the override button for
additional braking force. If additional braking force is required
turn the dial clockwise and return your hand to the wheel in a
quick and timely manner.
LED STATUS INDICATION
LED Indication Status
BLUE (Constant On)
Trailer connected / brakes connected / all systems OK
BLUE (Flashing)
Either:
• Brake pedal pressed, controller actively braking
• Override has been pressed
Note: Unit will flash 3-4 times after pressing the brake or using the override then return
to solid state.
OFF
No power or trailer is disconnected from vehicle
FOR MORE INFORMATION ABOUT THESE PRODUCTS
Freecall the Bendix Brake Advice Centre on
1800 819 666 (8am-5pm Monday to Friday EST)
or +61 3 5327 0211 from overseas.
Visit our website bendix.com.au / bendix.co.nz or
email us, brakeadvicecentre@bendix.com.au
PRJ-08081
WARRANTY CONDITIONS:
This product comes with a 3 year warranty.
The customer is entitled to a replacement or refund for a major
failure and compensation for any other reasonably foreseeable
loss or damage.
The customer is also entitled to have the products repaired or
replaced if the products fail to be of acceptable quality and the
failure does not amount to a major failure.
Bendix warrants that its products will, under normal use and
service, be free of defects in material and workmanship for a
period of 3 years from the date of the original purchase by the
customer as marked on the customer’s original invoice.
Please refer to our website for full warranty and return
information which can be found at www.bendix.com.au
To Previous Page
Loading...
Need help?
General
