16 QUICK START: WHAT TO DO FIRST
3. Lift the cap on the top of the rubber tab.
4. Fit the battery into place as described in the
next chapter. The idea is that the battery will be
securely fastened in the battery hole.
5. Finally stuff the bottom cover into the bottom
connector so that the cover will be firmly se-
cured around the connector.
Fitting the battery
1. Place the bottom of the battery into the small
hollows at the bottom of the phone.
2. Push the battery towards the rear of the phone
until it locks into place.
Bottom cover
Bottom
connector
To Next Page
Loading...