44 BRIEF OVERVIEW OF NAVIGATOR USE: FIRST STEPS
You can also wake up the GPS receiver manually as
follows:
1. Make sure that the GPS antenna has an unob-
structed view of the sky. The GPS receiver does
not work indoors.
2. On any of the navigator pages, press
- GPS to
enter the
GPS menu.
3. Use
n to select Update position and press -
OK.
INITIALIZING THE GPS RECEIVER
The GPS receiver may experience trouble in a cal-
culating your position e.g. after long international
flights or when it has been off for an extended pe-
riod of time.
If this happens, you can speed up the position ac-
quisition as follows:
1. On any of the navigator pages, press
- GPS to
enter the
GPS menu.
2. Use
n to select Maps and press - SELECT.
3. Show the
World map by pressing - SELECT.
4. Use
1, 2, 3, 4, 6, 7, 8, and 9 to
move the pointer on the map to your present
position.
5. Press
- SELECT.
6. Initialize the GPS receiver by selecting
Set as
position
. Press - OK.
7. Do as described under Getting first GPS posi-
tion above.
In case the problem persists, you can reset the GPS
receiver by selecting
Reset position from the Main
menu, Settings, GPS, and try again.
To Next Page
Loading...