IV
TURNING THE GPS RECEIVER ON/OFF
1. In stand-by mode or on the navigator pages, en-
ter the
Quick menu by pressing n.
2. Find
GPS receiver with the help of n and press
- CHANGE.
3. Select the desired activity with the help of
n
and press - OK.
ACCESSING MENUS
•In stand-by mode, enter the
GSM menu by press-
ing
- GSM.
•In stand-by mode (or on the navigator pages),
enter the
Quick menu by pressing n.
•In stand-by mode (or on the navigator pages),
enter the
Main menu by pressing . MENU.
•In stand-by mode, enter the navigator pages
(or
browse them) by pressing the lower side keys
<
and >. Another way: in stand-by mode, first enter
the
Main menu by pressing . MENU, then high-
light the desired navigator page (i.e.
Map, Guide,
Position,
or Movement) with n and press -
SELECT.
•On any of the navigator pages, enter the
GPS
menu
by pressing - GPS.
•You can return to stand-by mode from all
menu levels by pressing
c. Another way: first
enter the main menu by pressing
. MENU, in
which you select the option
Phone.
USING MENU FUNCTIONS
1. The menu items are shown as a list which can
be scrolled with the help of
n.
2. To choose one of these items, highlight the
item and press the right function key, e.g.
-
SELECT. You will then enter a sub-menu or
have some other appropriate options.
3. Press
. QUIT to return to the previous menu
level or
c to return to stand-by mode.
READING NEW SHORT MESSAGES AND
RESPONDING TO UNANSWERED CALLS
Unanswered calls and new short messages you
have recently received are shown in "a traffic
list" in stand-by mode.
1. Select an unanswered call, marked with
J,
with the help of
n. Press l to call its number.
You can also save it at once.
2. Select a message, marked with
s, with the
help of
n. Press - SELECT to read or otherwise
process it.
3. Exit the list by pressing
. QUIT.
To Next Page
Loading...