Need help?Do you have a question about the Benelli 900 Sei and is the answer not in the manual?
General| Compression Ratio | 9.8:1 |
|---|---|
| Transmission | 5-speed |
| Cooling | Air |
| Top Speed | 200 km/h (124 mph) |
| Front Suspension | Telescopic forks |
| Displacement | 900cc |
| Rear Suspension | Dual shock absorbers |
| Front Brakes | Two discs |
| Rear Brakes | Single disc |
| Power | 80 hp (59.6 kW) @ 8000 rpm |
Ensuring the use of Original Benelli spare parts is crucial for warranty.
Details the warranty period, limitations, and conditions for validity.
Key engine details: cylinders, bore, stroke, displacement, power, and speed.
Information on carburettors, atomizers, and fuel components.
Specifies lubrication type, pressure, and oil filter details.
Information on the electronic ignition system and spark plugs.
Details on clutch, gearbox, and gear ratios for power delivery.
Identifies key operational controls like levers, grips, pedals, and instruments.
Details switches for signals, horn, lights, and engine stop.
Covers indicator lights, footrests, and fuel cap.
Instructions for locking and unlocking the steering and seat.
Details on indicators like Rev counter, oil pressure, and turn signals.
Operation of the ignition switch, and how to operate headlights and parking lights.
Operation of ignition switch positions and key removal.
Details on turn signal, horn, and engine stop switches.
How to use and adjust the throttle grip and front brake lever.
Operation and adjustment of the clutch lever and gear pedal.
Fuel tank capacity, opening, and fuel tap positions.
Advice on riding safely in bends, wet conditions, and importance of clothing.
Step-by-step guide to starting a cold engine.
Procedures for starting, riding, stopping, and parking the motorcycle.
Importance of engine oil, adding, and changing procedures.
Procedure for changing oil filter cartridge and front fork oil.
How to clean the oil pump strainer.
How to adjust clutch free play and manage hydraulic brake fluid.
Procedure to remove air from the hydraulic brake system.
How to adjust the play on the front brake lever and rear brake pedal.
Adjusting steering for play and rear suspension spring preload.
How to adjust the drive chain tension and alignment.
Procedures for removing and refitting the front and rear wheels.
Checking tyre condition, tread depth, and recommended pressures.
Tasks for monthly checks and periodic inspections.
Maintenance tasks scheduled at 500 km and 3000 km intervals.
Information on carburettors, settings, and adjustment procedures.
Procedure for accessing and cleaning or replacing the air filter element.
Procedure to check and adjust valve tappet clearance.
Specifications for valve timing and firing order.
How to inspect and adjust the ignition timing.
Maintenance, inspection, cleaning, and replacement of spark plugs.
Explanation of how the electronic ignition system functions.
Detailed instructions for battery charging, filling, and maintenance.
Location and procedure for replacing fuses in the electrical system.
Step-by-step guide for replacing headlight, tail, and turn signal bulbs.
How to adjust the headlight beam for optimal visibility and safety.
Preparation, careful points, and post-washing steps for cleaning the motorcycle.
Procedure for preparing the motorcycle for long-term storage.
Wiring for lights, turn signals, and warning indicators.
Wiring for ignition coil, starter motor, alternator, and regulator.
Wiring for switches, relays, and the side stand switch.
To Next Page
