Do you have a question about the Benelli TNT150 and is the answer not in the manual?
front tire pressure | 190 kPa (1.9 kgf/cm^2) |
---|---|
rear tire pressure | 210 kPa (2.1 kgf/cm^2) |
front tire size | 100/80-17 |
rear tire size | 130/70-17 |
compression ratio | 9.2:1 |
---|---|
engine type | Single-cylinder, Four-stroke, Two-valve |
bore x stroke | Ø57.3×58 mm |
displacement | 150 ml |
maximum power | 9.6 kW/8000 r/min |
maximum torque | 12.8 N.m/6500 r/min |
fuel tank capacity | 13.5 L |
---|---|
fuel type | Regular unleaded gasoline only |
front brake type | Disk Brake |
---|---|
rear brake type | Disk Brake |
length | 2050 mm |
---|---|
width | 810 mm |
height | 1065 mm |
wheelbase | 1360 mm |
dry weight | 135 kg |
Key safety guidelines for operating the vehicle, including warnings and precautions.
Overview of vehicle components and their locations, including views from left and right.
Information related to vehicle identification numbers (VIN) and engine serial numbers.
Detailed explanation of the vehicle's controls, instruments, and their functions.
Emphasizes owner responsibility for safe vehicle operation and adherence to manual instructions.
Crucial advice on safe riding practices, including pre-operation checks and skill awareness.
Details essential protective gear, such as helmets, jackets, and gloves, for rider safety.
Warns about carbon monoxide from exhaust fumes and necessary precautions.
Additional advice on navigating slippery conditions, intersections, and vehicle loading.
Diagrams identifying components from the left and right views of the vehicle.
Details on vehicle and engine identification numbers for registration and parts.
Explanation of the meter display, indicators, and function buttons.
Details on switches and levers located on the left handlebar, like choke and horn.
Details on switches and levers located on the right handlebar, like engine stop and starter.
Instructions for operating the headlight dimmer switch for high and low beams.
How to use the turn signal switch for left and right indicators.
Operation of electric starter, choke, clutch, throttle, and lights.
Information on the fuel tank switch positions (Off, On, Reserve) and refueling.
Guidance on adjusting the rear shock absorber preload for different conditions.
Instructions for using the rear brake pedal and its effect on the brake light.
Advice on smooth gear shifting using the shift pedal to avoid damage.
Detailed checklist for pre-ride inspections of fuel, engine oil, brakes, and tires.
Procedure for starting the engine, including checks and use of choke.
How to adjust speed using the throttle grip.
Proper braking methods, emphasizing simultaneous use of front and rear brakes.
Guidelines for the critical 0-1000 km period to ensure engine longevity.
Chart detailing maintenance items and intervals based on odometer reading.
Instructions for safely parking the vehicle and removing the ignition key.
Procedure for checking spark plug condition, gap, and signs of wear.
How to check the engine oil level and when to change the oil.
Covers checks for brake levers, stands, forks, shock absorbers, and cables.
Step-by-step guide for draining and refilling engine oil.
Information on setting the correct idle speed for optimal engine performance.
Explanation of valve clearance and the need for professional adjustment.
Instructions for cleaning or replacing the air filter element.
How to check and adjust free play for throttle and clutch controls.
Procedure for checking and adjusting free play for front brake lever and rear brake pedal.
Explanation of how the CBS works and its benefits for braking.
How to inspect brake pads for wear using indicator grooves.
Information on recommended brake fluid and checking the reservoir level.
Advice on battery charging and maintenance, especially with accessories.
Instructions for replacing blown fuses or bulbs with correct specifications.
Importance of checking tire pressure and tread for safety and longevity.
Recommended cold tire pressure for front and rear tires.
Guidance for storing the vehicle in a cool, dry place for short periods.
Steps for preparing the vehicle for storage over several months, including oil and fuel.
Key dimensions, wheelbase, and dry weight of the vehicle.
Specifications for engine type, model, displacement, and fuel tank capacity.
Details on brake types and tire sizes for front and rear wheels.