EasyManua.ls Logo

Benelli TnT302S User Manual

Benelli TnT302S
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TnT302S OWNER’S MANUAL
Question and Answer IconNeed help?

Do you have a question about the Benelli TnT302S and is the answer not in the manual?

Benelli TnT302S Specifications

General IconGeneral
Displacement300 cc
Transmission6-speed
Fuel SystemElectronic fuel injection
Seat Height795 mm
Engine TypeInline 2-cylinder, 4-stroke, liquid-cooled
Max Power38 hp @ 11, 500 rpm
Max Torque26.5 Nm @ 9, 000 rpm
Front Suspension41 mm upside-down forks
Rear SuspensionMonoshock
Front BrakeTwin 260 mm discs with 4-piston calipers
Rear BrakeSingle 240 mm disc with single-piston caliper
Wheelbase1, 410 mm
Fuel Capacity16 L
Weight196 kg (wet)
Tire Front110/70 R17
Tire Rear150/60 R17

Summary

Important Reminder

Preface

Break-in of your Motorcycle

Importance of the first 1,000km for engine lifespan and performance optimization.

Safety Notes

Protective Clothing

Recommendations for rider and passenger safety gear, including helmets, boots, gloves, and clothing.

Serial Number

Location of Parts

Left View

Diagrams and labels for parts visible from the left side of the motorcycle.

Right View

Diagrams and labels for parts visible from the right side of the motorcycle.

Meter & Indicator

Detailed explanation of the motorcycle's dashboard meter and indicator lamps in daytime mode.

Primary Parts

Photosensitive Switch

Explanation of the meter's automatic day/night mode switching and manual operation.

Ignition Switch

Description of the ignition switch positions (On, Lock, Off) and a safety notice.

Left Handlebar

Details and functions of controls located on the left handlebar, including horn, beams, and turn signals.

ABS Switch (if equipped)

Instructions for enabling and disabling the ABS system using the switch, and its operational modes.

Right Handlebar

Explanation of controls on the right handlebar, including engine stop, starter, lights, and meter buttons.

Fuel Tank

Information on fuel tank capacity, opening/closing the cap, and fuel type recommendations.

Rear Shock Absorber

Instructions for adjusting spring preload and rebound damping on the rear shock absorber.

Rear Brake Pedal

How to use the rear brake pedal to slow down the motorcycle and its effect on the brake light.

Shifter Lever

Information about the motorcycle's six-speed gearbox and the neutral indicator light.

Fuel and Engine Oil Recommended

Engine Break-In

Pre-Ride Inspections

Pre-Ride Checklist

A comprehensive checklist of items to inspect before riding, including tires, fluids, lights, controls, and chain.

Riding Tips

How to Start the Engine

Guidance on starting the motorcycle's engine safely, with important notices and warnings.

Accelerating & Decelerating

Instructions for smooth acceleration, deceleration, gear shifting, and riding on inclines.

Inspection & Maintenance

Maintenance Schedule

A table outlining recommended maintenance intervals and tasks based on odometer readings.

Oil Level & Oil Change

Procedure for checking engine oil level and performing routine oil and filter changes.

Spark Plug

Maintenance steps for the spark plug, including cleaning, gap adjustment, and replacement intervals.

Catalytic Converter

Information about the catalytic converter's function, importance, and a caution regarding its heat.

Battery

Details on the maintenance-free battery type, its location, removal, and installation procedures.

Throttle Cable Adjustment

Step-by-step guide to adjust the throttle cable free play for optimal operation.

Clutch Adjustment

How to measure and adjust the clutch lever free play to the recommended specification.

Chain Adjustment

Instructions for adjusting the drive chain slack, including frequency and importance of regular checks.

Brake System

Information on front and rear disc brakes, brake fluid type, replacement interval, and brake pad checks.

Air Filter Maintenance

Guide for cleaning and maintaining the air filter, especially in dusty conditions.

Bulb Replacement

Steps for replacing the headlight bulb, emphasizing using the correct specification.

Fuse Replacement

Location of fuses, causes of frequent blowing, and the importance of using correct specifications.

Lubrication Points

Key points on the motorcycle that require lubrication with grease for proper operation and longevity.

Adjustment of Valve Clearance

Procedure for checking and adjusting valve clearance when the engine is cold, with recommended specifications.

Tires

Importance of checking tire inflation pressure and tread depth for safety and service life, with recommended pressures.

Storage Guidelines

Storage

Recommended steps for storing the motorcycle for extended periods to prevent damage and ensure readiness.

Emissions Warranty

Emission Control System

Explanation of warranty rights, obligations, and the scope of emission control system coverage.

Specifications & Technical Parameters

Size and Weight

Dimensions, wheelbase, and dry weight of the motorcycle.

Engine

Technical specifications of the engine, including type, displacement, power, torque, and ignition.

Electrical System

Specifications for the battery, magneto, headlamp, and other electrical components.

Capacity

Fuel tank capacity and fuel type recommendations.

Related product manuals