Benelli TnT302S - Oil Level & Oil Change

TnT302S
34
suggested to be repaired by an authorized dealer: with special tools and inspection data provided by the
manufacturer; by persons with a mechanical repair certication; and requires they follow the steps outlined in the
maintenance schedule. Examination and repairs are suggested to be made only by authorized dealers for the sake
of safety for these particular repairs.
Notes:
1. Inspect more frequently when riding in dusty areas.
2. When the mileage exceeds the range given on the maintenance schedule start back at the beginning.
3. Take more maintenance to keep good performance for frequent driving in heavy conditions as rugged roads.
OIL LEVEL & OIL CHANGE
Check the oil level before starting the engine.
Put the motorcycle on the side stand. Lift the handle bar and
let the bike stand vertical to the at ground. Check if the oil
level is between the maximum and minimum level. If not, add
the qualied engine oil to the proper level.
Oil Change & Oil Filter Replacement
1. Remove the oil lter with the special tool and oil drain
bolt before oil draining.
2. Replace the oil lter with a new one if needed.
INSPECTION BEFORE DRIVING
2
3
1
2