Benelli TnT302S - Left Handlebar

TnT302S
16
1. HORN BUTTON
Press down on the button to activate the horn.
2. HIGH & LOW BEAM SWITCH
Turn the switch to the " " position, the high beam of the headlamp
turns on and the indicator lamp on the meter will also turn on; turn
the switch to the " " position, the low beam of the headlamp will turn on.
3. DIRECTION INDICATOR LAMP SWITCH
Turn the switch to " " position, the left direction signal lamp ashes;
turn the switch to " " position, the right direction signal lamp ashes;
and the indicator lamps will ash accordingly.
4. PASSING SWITCH
When passing other vehicles, press this button so the high beam of
the headlight will ash to alarm the vehicles in front of you.
PRIMARY PARTS
Warning：
Turn on the direction signal lamps in time when changing lanes or
turning a direction, turn o the lamps when turning is complete.
2
4
3
5
1
2
4
3
5
1
or
LEFT HANDLEBAR
HAZARD SWITCH