Need help?Do you have a question about the Benelli TNT25 and is the answer not in the manual?
General| Displacement | 249.2 cc |
|---|---|
| Bore x Stroke | 72 mm x 61.2 mm |
| Compression Ratio | 11.2:1 |
| Starting System | Electric |
| Transmission | 6-speed |
| Clutch | Wet multi-plate |
| Front Brake | 280 mm Disc |
| Front Tire | 110/70 - 17 |
| Rear Tire | 150/60 - 17 |
| Length x Width x Height | 2080 mm x 810 mm x 1125 mm |
| Seat Height | 780 mm |
| Wheelbase | 1400 mm |
| Kerb Weight | 159 kg |
| Engine Type | Single Cylinder, 4 Stroke, Liquid Cooled |
| Maximum Torque | 21.6 Nm @ 8000 rpm |
| Fuel System | Electronic fuel injection |
| Ignition | ECU |
| Frame Type | Steel trestle |
| Front Suspension | Upside Down Telescopic Forks |
| Rear Suspension | Hydraulic Monoshock |
| ABS | No |
Explanation of how user data is handled and protected by Benelli.
Guidelines for safe motorcycle operation and rider responsibility.
Description of warning symbols indicating potential dangers and important notices.
Outlines legal and practical duties of the motorcycle operator regarding vehicle use.
Provides advice on safe riding techniques, visibility, and hazard avoidance.
Recommends protective gear like helmets, jackets, and boots to minimize injury risk.
Alert regarding the dangers of carbon monoxide poisoning from exhaust gases.
Warnings about running the engine in enclosed or poorly ventilated spaces.
Guidance on safely adding loads and accessories, considering weight distribution.
Considerations for choosing non-original tires and rims, and their impact on performance.
Explains the location of engine number, frame number, and model label for identification.
Identification and description of the motorcycle's main external and internal components.
Description of switches and levers on the handlebars for operating lights and ignition.
Identification of lights, gauges, and indicators on the instrument panel for monitoring status.
Detailed explanations for each indicator and gauge on the dashboard, including settings.
Operation of high beam, turn signals, horn, and passing lights on the left handlebar.
Operation of ignition, emergency lights, and engine stop switch on the right handlebar.
How to use and adjust the clutch lever for optimal engagement and disengagement.
How to use and adjust the front brake lever for effective stopping power.
How to operate the rear brake pedal for controlled deceleration.
How to shift gears using the gear pedal in conjunction with the clutch lever.
Operation and safety features of the side stand, including ignition interlocks.
Explanation of safety interlocks for ignition, including side stand and neutral gear switches.
Usage of the ignition key for starting, steering lock, fuel cap, and saddle access.
Operation of the ignition switch, its positions, and key removal procedures.
How to lock and unlock the steering mechanism to prevent unauthorized use.
How to open and close the rider and passenger seats for access.
Procedure for opening, closing, and refueling the fuel tank, including cap operation.
How to adjust the spring pre-load for ride comfort and handling characteristics.
Guidelines and warnings regarding the use of accessories, including impact on safety.
Description of the supplied adjustable rear view mirrors and their proper adjustment.
Importance of daily pre-ride checks for safety, damage prevention, and operational readiness.
Procedure for checking and topping up engine oil, including oil type recommendations.
Safety precautions and steps for refueling the fuel tank, emphasizing no smoking.
How to check and adjust throttle play for safety, ensuring proper return function.
How to inspect the front fork and rear shock absorbers for proper operation and condition.
Procedure for checking front and rear brake fluid levels and identifying leaks.
Warnings and procedures for topping up and replacing brake fluid, including correct fluid type.
How to inspect brake pads for wear indicators and determine when replacement is necessary.
How to check and maintain the level of cooling fluid in the system for engine cooling.
How to verify operation of stop lights, turn signals, and other vehicle lighting systems.
How to adjust and check rear view mirrors for proper visibility and condition.
How to check tyre pressure, wear, and inspect for damage to ensure stability and safety.
How to check headlights, taillight, and number plate light for proper operation.
Verifying the operation of the odometer and speedometer for accurate mileage tracking.
How to test the horn to ensure it is functioning correctly.
How to check and adjust the transmission chain's slack for optimal performance.
Steps for turning on the ignition and starting the engine, including safety checks.
How to smoothly move the motorcycle from a standstill using clutch and throttle control.
How to use the accelerator for speed control, including smooth acceleration techniques.
Procedure for changing gears up and down smoothly and correctly.
Advice on how to reduce fuel usage through efficient riding style and gear selection.
Advice on general riding care, proper braking, and maintaining visibility to other road users.
Steps for safely stopping the vehicle and parking it securely, including steering lock.
Advice on where and how to park the motorcycle, considering sun exposure and surface stability.
Instructions for the initial break-in period of the motorcycle, covering mileage and RPM limits.
Importance and overview of scheduled maintenance for ensuring vehicle reliability and safety.
How to maintain the air filter for optimal performance, considering dusty environments.
Guidance on engine oil changes, recommended procedures, and when to seek professional help.
How to adjust the tension of the drive chain for correct operation and to prevent damage.
Procedures for maintaining the drive chain, including cleaning solvents and lubrication methods.
Advice on lubricating moving parts of the motorcycle, recommending specific products.
How to check and top up the engine's coolant level for optimal operating temperature.
When and how to change the coolant, with warnings about hot engine operation.
How to adjust play in the clutch lever for proper engagement and disengagement.
Guidance on checking and replacing spark plugs, and when to seek expert assistance.
How to check the battery, its storage procedures, and precautions for long-term inactivity.
Steps for cleaning battery terminals to ensure good electrical connection and prevent corrosion.
How to identify and replace blown fuses, including correct amperage and safety precautions.
Guidance on replacing vehicle bulbs, including headlamp, and when to consult a workshop.
Benelli's commitment to environmental standards in vehicle use and part disposal.
Overview and guidelines for the maintenance schedule based on mileage and time intervals.
Important notes regarding annual checks, service intervals, and dealer recommendations.
Explanation of symbols used in the maintenance table for service interventions.
Advice on choosing lubricants and potential warranty issues with non-original products.
Details and record for the first scheduled maintenance service performed on the vehicle.
Details and record for the second scheduled maintenance service performed on the vehicle.
Details and record for the third scheduled maintenance service performed on the vehicle.
Details and record for the fourth scheduled maintenance service performed on the vehicle.
Details and record for the fifth scheduled maintenance service performed on the vehicle.
To Next Page
