Benelli TNT25 User Manual

65
EN
GENERAL INFORMATION
Dear Customer,
Please read this manual carefully before using your new BN251.
It contains important information for the safe use of your motorbike and also about how to keep it in good working order.
Please remember that your BN251 is a high-performance bike and that it needs to be ridden carefully and by an experienced rider.
Do not take the engine to its limits if you are not more than certain of being able to handle the bike and in any case, when riding on
public highways or on roads that are open to the public, always be sure to follow the regulations in the Highway Code.
Always wear a standard-approved helmet when you ride and make sure it fits correctly and is properly fastened.
We also advise you to wear suitable protective clothing at all times.
GENERAL INFORMATION
Senza titolo-2 2 21/12/2015 15:49:42
Benelli TNT25 Owner's Manual
http://www.motorcycle.in.th

Benelli TNT25 Specifications

General

Displacement	249.2 cc
Bore x Stroke	72 mm x 61.2 mm
Compression Ratio	11.2:1
Starting System	Electric
Transmission	6-speed
Clutch	Wet multi-plate
Front Brake	280 mm Disc
Front Tire	110/70 - 17
Rear Tire	150/60 - 17
Length x Width x Height	2080 mm x 810 mm x 1125 mm
Seat Height	780 mm
Wheelbase	1400 mm
Kerb Weight	159 kg
Engine Type	Single Cylinder, 4 Stroke, Liquid Cooled
Maximum Torque	21.6 Nm @ 8000 rpm
Fuel System	Electronic fuel injection
Ignition	ECU
Frame Type	Steel trestle
Front Suspension	Upside Down Telescopic Forks
Rear Suspension	Hydraulic Monoshock
ABS	No