EasyManuals Logo

Benelli TNT25 User Manual

Benelli TNT25
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
87
EN
CHECKS BEFORE RIDING
-
CHECKS BEFORE RIDING
IMPORTANT NOTICE:
Topping up engine oil
Senza titolo-2 24 21/12/2015 15:49:55
A
It is a good idea to get used to making a
quick inspection of the vehicle before
riding it.
This daily inspection, as well as being
essential for safety, may also prevent
damage to the vehicle.
If you find any anomalies, contact a
Benelli assistance service as soon as
possible.
ENGINE OIL CHECKS
While the engine is cold, keep the
vehicle upright .
Use the gauge to make sure that the oil
level is between the maximum and
minimum as shown in the figure.
If the level is near to the minimum, top up
the oil as described in the section
“Topping up the engine oil”. We recom-
mend using Petronas Power Speed 4T oil.
Take care against burns and scalds
during this check.
• Never exceed the maximum level.
Too much oil can cause malfunctions
and damage to the engine.
• The oil level reading will be incorrect if
the vehicle is parked on an uneven
surface or if the engine is hot.
• The owner is responsible for making
regular checks o the engine oil and for
topping up as needed.
Normal oil consumption will lead to a
lack of oil in the engine, even if services
are carried out regularly.
1) While the engine is cold, keep the
vehicle upright.
2) Turn the cap “A” counter anti-clock-
wise and remove it.
3) Add oil until it reaches a level
between the minimum and maximum
limits.
4) Insert the cap “A” and tighten it by
turning it clockwise. Clean off any oil
residues.
Benelli TNT25 Owner's Manual
http://www.motorcycle.in.th

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Benelli TNT25 and is the answer not in the manual?

Benelli TNT25 Specifications

General IconGeneral
Displacement249.2 cc
Bore x Stroke72 mm x 61.2 mm
Compression Ratio11.2:1
Starting SystemElectric
Transmission6-speed
ClutchWet multi-plate
Front Brake280 mm Disc
Front Tire110/70 - 17
Rear Tire150/60 - 17
Length x Width x Height2080 mm x 810 mm x 1125 mm
Seat Height780 mm
Wheelbase1400 mm
Kerb Weight159 kg
Engine TypeSingle Cylinder, 4 Stroke, Liquid Cooled
Maximum Torque21.6 Nm @ 8000 rpm
Fuel SystemElectronic fuel injection
IgnitionECU
Frame TypeSteel trestle
Front SuspensionUpside Down Telescopic Forks
Rear SuspensionHydraulic Monoshock
ABSNo

Related product manuals