Benelli TNT25 User Manual

88
EN
IMPORTANT NOTICE:
CHECKS BEFORE RIDING
IMPORTANT NOTICE:
-
-
3÷5 mm
Senza titolo-2 25 21/12/2015 15:49:55
REFUELLING
Before setting out on a journey, make
sure you have enough fuel. For the fuel
cap opening procedure, see the relevant
paragraph (FUEL TANK).
Before refuelling, switch off the engine
and make sure no one is sitting on the
vehicle.
• Never refuel while smoking or in proxi-
mity to sparks, naked flames or other
sources of ignition.
• Never overfill the fuel tank.
• When refuelling, make sure that the
pump nozzle is inserted into the open-
ing in the fuel tank. Stop filling when the
fuel reaches the bottom of the filling
opening. Considering that fuel expands
when it heats, the heat from the engine
or from the sun could cause it to over-
flow from the tank. Immediately dry up
any fuel spillage with a rag.
• Use a clean, dry and soft cloth to wipe
away any spilled fuel, as it could dama-
ge painted or plastic parts.
ACCELERATOR DIAL
BACKLASH CONTROL
Make sure that the accelerator dial has a
backlash of 3-5 mm.
Also check to ensure that the closure is
total and automatic in every steering
position.
If the accelerator fails to return automati-
cally, this could cause dangerous
situations and falls.
Benelli TNT25 Owner's Manual
http://www.motorcycle.in.th

Benelli TNT25 Specifications

General

Displacement	249.2 cc
Bore x Stroke	72 mm x 61.2 mm
Compression Ratio	11.2:1
Starting System	Electric
Transmission	6-speed
Clutch	Wet multi-plate
Front Brake	280 mm Disc
Front Tire	110/70 - 17
Rear Tire	150/60 - 17
Length x Width x Height	2080 mm x 810 mm x 1125 mm
Seat Height	780 mm
Wheelbase	1400 mm
Kerb Weight	159 kg
Engine Type	Single Cylinder, 4 Stroke, Liquid Cooled
Maximum Torque	21.6 Nm @ 8000 rpm
Fuel System	Electronic fuel injection
Ignition	ECU
Frame Type	Steel trestle
Front Suspension	Upside Down Telescopic Forks
Rear Suspension	Hydraulic Monoshock
ABS	No