Benelli TNT25 User Manual

103
EN
MAINTENANCE
IMPORTANT NOTICE:
FUSE REPLACEMENT
Turn the key to “ ” before checking
to see if a fuse is burned.
Fuses are present in the battery com-
partment. The following fuses can be
seen in the photo:
1. Maint Fuse (25A)
2. Injection Fuse (15A)
3. Spare Parts Fuse
Senza titolo-2 40 21/12/2015 15:50:02
2
1
3
• After fitting the new fuse, check that
the terminals are not loose, which could
be the cause of a malfunctioning
electrical system.
• Fuses with different characteristics to
those indicated, can cause damage to
the electrical system.
MOTORCYCLE LAMP REPLACE-
MENT
Headlamp bulb replacement
To replace the bulbs in the headlamp,
contact a specialised Benelli workshop.
Benelli TNT25 Owner's Manual
http://www.motorcycle.in.th

Benelli TNT25 Specifications

General

Displacement	249.2 cc
Bore x Stroke	72 mm x 61.2 mm
Compression Ratio	11.2:1
Starting System	Electric
Transmission	6-speed
Clutch	Wet multi-plate
Front Brake	280 mm Disc
Front Tire	110/70 - 17
Rear Tire	150/60 - 17
Length x Width x Height	2080 mm x 810 mm x 1125 mm
Seat Height	780 mm
Wheelbase	1400 mm
Kerb Weight	159 kg
Engine Type	Single Cylinder, 4 Stroke, Liquid Cooled
Maximum Torque	21.6 Nm @ 8000 rpm
Fuel System	Electronic fuel injection
Ignition	ECU
Frame Type	Steel trestle
Front Suspension	Upside Down Telescopic Forks
Rear Suspension	Hydraulic Monoshock
ABS	No