TnT302S
46
LUBRICATION POINTS
Appropriate lubrication is important to keep every part of your motorcycle in normal working condition and
lengthen its service life and to ensure safe operation. Lubricate your motorcycle after you have ridden it for many
miles or the vehicle gets wet due to rain or cleaning. Detailed lubrication points are shown in the gure below:
Motorcycle lubricant
Lubricant type: Grease
1. Rear brake pedal shaft
2. Side stand and its spring
3. Throttle cable
4. Front brake lever pivot
5. Clutch lever pivot
ADJUSTMENT OF VALVE CLEARANCE
Only check and adjust the valve clearance when the engine is cold.
The Standard Valve Clearance: Intake Valve: 0.20-0.25mm, Exhaust Valve: 0.25-0.30mm
INSPECTION BEFORE DRIVING
To Next Page
Loading...
