Benelli TnT302S - Engine Break-In; Pre-Ride Inspections

TnT302S
26
While riding your new motorcycle during the rst 1,000km (600 mi.), the engine should not be over revved and all
of the gears should not exceed 80% of the red zone of engine RPM; never fully open the throttle; and change gears
in time to keep engine RPM in a reasonable range. It is strongly suggested to use the motorcycle very carefully
during the break-in period.
Tip：During the rst 300km (185 mi.) of break-in, you should examine the cleanliness of the engine oil frequently.
Check the engine oil level before riding every time.
PRE-RIDE INSPECTIONS
Checking the following items before riding is very important to your safety:
ENGINE BREAK-IN
Check
Handlebar
Braking
Inspection
1) Stable
2) Turn smoothly
3) Not loose or bent
1）Correct brake lever and brake pedal free-play
2）Not spongy feeling