EasyManua.ls Logo

Benelli TnT302S - Storage Guidelines; Storage

Benelli TnT302S
55 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
STORAGE GUIDELINES
TnT302S
48
Tire Tread
Riding a motorcycle with tires that are excessively worn will reduce the riding stability or even cause a loss of
control. When the tire tread of the front tire is less than 1.6mm, and the rear tire tread is less than 2mm or less,
replacement is strongly recommended.
STORAGE GUIDELINES
Storage
If you need to store your motorcycle for a long time without use, it's suggested to follow these instructions:
1. Change the engine oil.
2. Lubricate the drive chain
3. Remove the spark plug and add one teaspoon of (15~20cm3) clean engine oil into cylinder. Press the
start button several times to the distribute oil in the cylinder, then reinstall the spark plug.
4. Remove the battery. Keep the battery in a proper place which will avoid freezing and direct sunlight.
5. Clean and dry the motorcycle. Wax the surface of the paint.
6. Inate the tires to the required pressure. Place the motorcycle on a stand to lift the tires o of the ground.
7. Cover the motorcycle (no plastic or cloth materials) and keep it in a place with consistent temperature
and low humidity. Do not keep your motorcycle under direct sunlight.