EasyManua.ls Logo

Benelli TnT302S - Rear Brake Pedal; Shifter Lever

Benelli TnT302S
55 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TnT302S
24
PRIMARY PARTS
REAR BRAKE PEDAL
SHIFTER LEVER
Warning:
Rotate this adjusting knob by hand only, and never use too much force, or the rear suspension will be damaged.
This will be deemed as abnormal usage, and will not be covered by warranty.
REAR BRAKE PEDAL
Step on the rear brake pedal to slow
down the motorcycle. The
brake light will illuminate while in use.
SHIFTER LEVER
This motorcycle is equipped with a six-speed
constant mesh gearbox.
Notice:
When the transmission is in the neutral position, the indicator lamp will turn
on. Slowly release the clutch lever to make sure the transmission is in the
neutral position.
Generally speaking, when the spring pre-load is increased, the rebound damping should also be increased
accordingly. If you are not sure how to adjust the rear suspension correctly, please refer to your authorized dealer for
technical advice.