Benelli TNT150 - Consumer and Instrument Information; Consumer Information; Instrument Panel

7 - 8
TIP
CONSUMER INFORMATION
The vehicle identifi-
cation number or
the engine serial
number are used to
register the vehi-
cle,they are also to
assist your dealer in
terms of ordering
parts or referring to
special service
information
Meter & Indicator
engine serial number
● The vehicle identifi-
cation number ① is
stamped on the right
side steering head
tube.
● The engine serial
number ② is stamped
on the upper left of
the crankcase.
Vehicle identification number
( VIN )
1
VIN No.
ENGINE No.
INSTRUMENT AND CONTROL
FUNCTIONS
Key Switch
“ ”（Off）position:
All the circuits are off.
“ ”（On） position:
The circuits are on.
Do not turn your key to lock the vehicle while
driving which is not necessary and is also apt to
cause accident.
Press the key in a proper force.
NOTICE
2. TURNING INDICATOR
The indication lamps would ash with the turning signals.
1. TURNING INDICATOR
The indication lamps would ash with the turning signals.
3. HIGH BEAM INDICATOR LAMP
When the high beam lamp of the headlamp turns on,
the high beam indicator lamp would be on.
4. NEUTRAL INDICATOR LAMP
When the transmission is in the neutral, the green
indicator lamp would be on.
5. FUNCTION BUTTON A
4
3
5
1
2
7
8
9
11
12
6
10
2
P
U
S
H
“ ” (The steering lock)
Turn the steering handle to left, press the key to “ ”
position, the steering lock is locked. When it needs
to open, insert the key and turn to “ ” position, the
steering lock is released;
Short press the button to switch between km/h and mph.