Need help?Do you have a question about the Benelli BN251 and is the answer not in the manual?
General| Displacement | 249 cc |
|---|---|
| Bore x Stroke | 72 mm x 61.2 mm |
| Compression Ratio | 11.2:1 |
| Fuel System | Electronic Fuel Injection |
| Transmission | 6-speed |
| Front Tire | 110/70-17 |
| Seat Height | 780 mm |
| Engine Type | Single-cylinder, 4-stroke |
| Front Suspension | Telescopic forks |
| Rear Suspension | Monoshock |
| Front Brake | Single disc |
| Rear Brake | Single disc |
| Rear Tire | 140/60-17 |
Information on data protection and user privacy as per law.
Guidance on safe motorcycle operation, rider responsibilities, and awareness.
Essential protective gear for riders to prevent or reduce injuries during accidents.
Guidelines for safely adding accessories or loads to the motorcycle to maintain stability.
Considerations for choosing and using non-original tyres and wheel rims.
Indicator light for the engine's injection system status and potential issues.
Describes the function of the position indicator lights for signalling turns.
Displays the engine's rotational speed to help maintain it within the ideal power range.
Monitors the engine's coolant temperature, with warnings for overheating.
Shows the current time and provides instructions for setting it.
Indicates the remaining fuel level in the tank, including a reserve warning.
Displays the vehicle's speed in km/h or mph.
Explains the function of odometer and trip meter for tracking distance travelled.
Details how to use buttons to view and reset vehicle data like trip distance.
Instructions for switching between high and low beam headlights.
Operation and adjustment of the clutch lever for gear engagement.
Operation and adjustment of the front brake lever for control and stopping.
How to operate the rear brake pedal for stopping.
Operation of the gear pedal for shifting through the motorcycle's 6 gears.
Location and use of the side stand, including its safety function.
Explanation of safety interlocks involving the side stand and clutch.
Information on the supplied keys and their functions for ignition, saddle, and fuel cap.
Operation of the ignition switch for starting and stopping the engine and lights.
How to lock the steering to prevent unauthorized use of the motorcycle.
Instructions for opening and closing the saddle using the key.
Procedure for opening, closing, and refuelling the fuel tank.
How to adjust the spring pre-load on the rear shock absorber for ride stiffness.
Warnings and recommendations regarding the use of original and non-original accessories.
Procedure for checking the engine oil level and important precautions.
Safety guidelines and procedure for refuelling the motorcycle.
How to check and adjust the accelerator cable's free play for safe operation.
How to check the condition of front and rear shock absorbers for proper function.
Procedures for checking front and rear brake fluid levels.
How to visually inspect brake pads for wear and when to replace them.
Guidance on maintaining brake fluid levels and replacement.
Procedure for checking the level of the engine's cooling fluid.
How to verify the proper operation of the stop light.
How to check the functionality of the turn indicators.
Instructions for adjusting and checking rear view mirrors for visibility.
How to check tyre pressure, tread depth, and for damage.
Verifying the operation of all lights, including headlamp adjustment.
Ensuring the kilometre counter and speedometer are functioning correctly.
How to check the operation of the horn or acoustic warning.
Checking and adjusting the tension of the final drive chain.
Steps for turning the ignition key on, checking steering lock, and preparing to start the engine.
How to use the accelerator dial for speed control and engine power.
Instructions for upshifting and downshifting gears using the clutch and gear lever.
Advice on driving techniques to improve fuel efficiency.
General safety advice for riding, including using indicators and brakes.
Warnings about sudden actions that can lead to loss of control or accidents.
Precautions for riding on wet surfaces, emphasizing reduced grip.
Guidance on safe downhill riding techniques, using brakes gently.
Steps for safely stopping the motorcycle and turning off the engine.
Instructions and recommendations for the initial break-in period of the motorcycle.
Importance of regular maintenance for safety, comfort, and longevity.
Guidance on engine oil changes, recommending authorized workshops.
Procedure for adjusting the transmission chain tension for optimal performance.
How to properly clean and lubricate the motorcycle's drive chain.
Recommends regular lubrication of sliding parts and chain maintenance.
Procedure for checking and topping up the engine's cooling fluid.
Detailed steps for checking the coolant level in the tank.
Advises having coolant changed by an authorized dealer at specified intervals.
How to check and adjust the clutch lever's free play.
Recommendations for spark plug checks and replacements by authorized personnel.
Steps for accessing and inspecting the motorcycle's battery.
Guidelines for proper battery storage to prevent damage and discharge.
Procedure for checking and replacing fuses in the electrical system.
Guidance on replacing motorcycle bulbs, recommending workshop assistance for headlamps.
Benelli's commitment to environmental protection regarding vehicle use and disposal.
The primary table outlining maintenance tasks, intervals, and required actions.
To Next Page
