47
48
5.5 Adjusting the rear suspension
Spring preload
Rebound damper hydraulic device
WARNING
The high temperature of the exhaust
pipes can cause burns. Before adjusting
the rear suspension, shut off the engine
and wait until the exhaust pipes have
thoroughly cooled.
The rear shock absorber contains highly
compressed gas. Do not try to open or
disassemble it in any way
When you estimate the rear suspension
settings, never push or pull in any way
on the exhaust muffler and on the tail.
They would be certainly damaged.
Check the rear suspension settings in the position
indicated by the arrow.
NOTE: At the moment of delivery of the motorcycle,
the rear suspension is adjusted in the standard
configuration, with damper spring length of 140 mm
(5.55 in) [14 mm (0.55 in) of preload].
OK
NO
To Next Page
