SJ-PM-TFmini Plus-T-01 A01
Benewake (Beijing) Co. Ltd.
Page20
Troubleshooting: Plug and unplug USB cable again. Try to reinstall the driver or directly download and
install a driver from the internet.
If the PC software still work abnormally, please contact our technical support.
10 Q&A
Q1: Is TFmini Plus available with 3.3V or other power supply voltage?
A1: Sorry, it is not available for the time being. The Standard power supply of TFmini Plus is 5V±0.5V. If
you have any further requirement, please contact our sales person to consult a customization design matter.
Q2: TFmini Plus will heat up after operating for a while. Is it broken?
A2: This is the normal operating condition of the product. The temperature of the chip and circuit board
will slightly up after a continuous operation, which is a normal case.
Q3: Can TFmini Plus be connected with Arduino or Raspberry Pi for use?
A3: Yes, it can. TFmini Plus adopts serial communication protocol so that it can connect to any control
board supporting serial port communication.
Contact
Head
To Next Page
Loading...
