13
TABLE 1
Mode LED Function Operations
0 Off No function Normal status.
Press the button P
1 Red Memorise channel 1
The red LED will light up, wait 3 secs, the LED will go out and light up
again, press within 5 secs the button on the transmitter to associate with
channel 1.*
Press within 3 secs the button P
2 Green Memorise channel 2
The green LED will light up, wait 3 secs, the LED will go out and light up
again, press within 5 secs the button of the transmitter to associate with
channel 2.*
Press within 3 secs the button P
3 Orange
Memorise automatically
channels 1 and 2
The orange LED will light up, wait 3 secs, t he LED will go out and light
up again, press within 5 secs any button on the transmitter.
Button 1 will be associated with channel 1, button 2 with channel 2.*
Press within 3 secs the button P
4
Red
Blinking
Set channel 1 times
The LED will give 5 rapid blinks. If button P is pressed during these 5
blinks the next mode is entered. After the 5 rapid blinks the Times menu is
entered. See section “Times Mode”
Press within 3 secs the button P
5
Green
Blinking
Set channel 2 times
The LED will give 5 rapid blinks. If button P is pressed during these 5
blinks the next mode is entered. After the 5 rapid blinks the Times menu is
entered. See section “Times Mode”
Press within 3 secs the button P
0 LED Off No function Normal status.
To Next Page
Loading...
