10
CLEANING THE MICROPARTICLE FILTER (14)
Twist filter securing lock (15) anticlockwise and remove Twist filter securing lock (15) anticlockwise and remove
2 3
1
4
5
6
7
8
The microparticle filter (14) is designed to trap any tiny particles that may escape the filter bag
Gently tap filter on a hard surface like the side of the dustbin
A soft brush can also be used to brush off any visible dirt / dust
For a more thorough clean, use compressed air blown through the centre of the filter
DO NOT use water or any liquid to clean the microparticle filter!
Once clean, replace filter in machine as specified in “Installing the Filters” section, refer to page 6, no.4
To Next Page
Loading...
Need help?
General
