Please read these instructions carefully, failure to operate your BENNETT READ ONE according to
these instructions may cause serious damage to your machine and result in the warranty being void.
Attach flexi hose inlet connector (29) by inserting into flexi hose inlet (4)
Push until you hear both flexi hose securing clips click (30)
Extend wand to desired length by pressing extension catch and pulling free
end of wand
Insert swivel handle (25) into end of stainless steel extension wand (22)
Attach multi floor surface cleaning head (18) to free end of extension wand
until it locks in place. To remove cleaning head, press securing button and
pull attachment away from wand in a simultaneous pulling/twisting motion
IMPORTANT:
7
9
8
10
7
To Next Page
Loading...
Need help?
General
