Bennett 3712 Quick Install Guide

1 135113 Rev C 4/2/18
3000 SERIES ELECTRONIC QUICK INSTALL GUIDE
This quick install guide covers the Bennett 3000 series dispenser specifications, identification, piping and wiring installation, programming modes,
diagnostic modes, error codes, and spare parts information needed for a 3000 dispenser built and/or retrofitted with 719 electronics. Please refer
to your technical manuals located on the USB provided for detailed information.
IMPORTANT SAFETY INSTRUCTIONS
Bennett Pump Dispensers are to be installed by trained technicians. All technicians must be aware of ALL safety instructions. If you are not a
Bennett trained technician, please contact Bennett Technical Support at 1-800-423-6638 for training information.
As you read this guide, please be aware of the following symbols and their meaning.
Red and White “DANGER” means: If you do not follow the instructions, severe injury or death will occur.
Orange and Black “WARNING” means: If you do not follow the instructions, severe injury or death can occur.
Yellow and Black “CAUTION” means: If you do not follow the instructions, damage can occur to the dispenser.
Blue and White “IMPORTANT” means: Helpful tips and other recommendations on equipment installation, usage, and maintenance should
be observed.
PRODUCT OVERVIEW
STAND ARD
Products .................................................................................................................................................................................................. Up to 2 Products
Hoses .............................................................................................................................................................................................. Up to 2 Hoses Per Side
Unit Type ............................................................................................................................................................................................. Straight Grade Only
Hydraulics ............................................................................................................................................................................................. Suction or Remote
Flow Rate ....................................................................................................................................................................................... 18-23 gpm/ 68-87 lpm
Inlet / Outlet ............................................................................................................................................ 1-1/2” (3.2 cm) dia NPT / 1” (2.54 cm) dia NPT
Protocol ........................................................................................................................................ Bennett Current Loop / Generic Current Loop / RS485
BIG FUELER
Products .................................................................................................................................................................................................. Up to 2 Products
Hoses .............................................................................................................................................................................................. Up to 2 Hoses Per Side
Unit Type ............................................................................................................................................................................................. Straight Grade Only
Hydraulics ............................................................................................................................................................................................. Suction or Remote
Flow Rate .................................................................................................................................................................................40 gpm/ 150 lpm (Suction)
60 gpm / 230 lpm (Remote)
Inlet / Outlet ................................................................................................................................................. 2” (5 cm) dia NPT / 1-1/4” (4.4 cm) dia NPT
Protocol ........................................................................................................................................ Bennett Current Loop / Generic Current Loop / RS485
SPECIFICATIONS
DIMEN SIO NS
Low Hose Dimensions (height x width x depth) ...................................................................................... 60" x 30” x 20” (152.4 cm x 76.2 cm x 50.8 cm)
High Hose Dimensions (height x width x depth) ..................................................................................... 88” x 30” x 20” (223.5 cm x 76.2 cm x 50.8 cm)
ENVIRONMENTAL REQUIR EMENTS
Operang / Storage Temperature .................................................................................................................................... -40

C to +65

C / -40

C to +85

C
Operang Humidity (In Use) ..................................................................................................................................................... 0 to 95% Non-Condensing
Storage Humidity (Not In Use) ............................................................................................................................................. 30% to 70% Non-Condensing
POWER REQUIREME NTS
Suction dispenser 1HP motors are set at the factory for 120V. 2-HP motors can only be used at 240V and are not interchangeable. (Big Fueler
Models are 240V)
AC Power Input, Electronic ............................................................................................................................ Universal Input 85-270 Volts A.C. 50/60 Hz
DC Power Supply Outputs............................................................................................................................... +5VDC 100mA Max, +12 VDC 100mA Max
DC Power Supply Outputs............................................................................................................... +24 VDC 1.0 Amps Max., +5VDC Isolated 50mA Max
Nickel-Cadmium Battery Output ........................................................................................................................................ +10.8VDC, 40 Milliamp Hours
Voltage ............................................................................................................................................................................................. 120/240VAC 50/60Hz

Bennett 3712 Specifications

General

Brand	Bennett
Model	3712
Category	Dispenser
Language	English