45 Menu operation
Image Resizing
• Motor Zoom
Magnifies or reduces the projected image size.
1. After the adjustment bar displays, press / on the projector
repeatedly to reduce or magnify the image to a desired size.
2. Press OK to enter panning mode.
3. Press the directional arrows ( , , , ) on the projector or
remote control to navigate the picture.
The picture can only be navigated after it is magnified. You can further magnify the
picture while searching for details.
• Digital Shrink & Shift
Shrinks and/or shifts the projected image.
1. After the adjustment bar displays, press / repeatedly to shrink or
magnify the picture to a desired size.
2. Press OK to activate digital shift function.
3. After digital shift function is activated, press the directional arrows
( , , , ) to shift the image.
The picture can only be shifted after it shrank.
• Blanking
Blanks some parts of the projected image.
1. Select the Modes of Adjustment first by pressing / .
2. Press / to highlight the area you want to adjust and press /
to adjust its range.
Enacting the Reset All Blanking Settings function will return all items in the Blanking
menu to the factory preset values. Pressing OK clears the values of selected item.
Wall Color
Corrects the projected picture’s color when the projection surface such
as a painted wall which may not be white, the Wall Color feature can
help correct the projected picture’s colors to prevent possible color
difference between the source and projected pictures. There are
several precalibrated colors to choose from: Light Yellow, Pink, Light
Green, Blue, and Blackboard.
To Next Page
