BenQ BH2401 - User Manual

Other manuals for BenQ BH2401

Installation Handbook107 pages

Installation Guide23 pages

Questions and Answers

J
Jennifer BishopAug 10, 2025
What to do if my BenQ Monitor has no picture?
- J
  jamiemorganAug 11, 2025
  If your BenQ Monitor displays no picture, verify the following: * Ensure the display is powered on by checking the power indicator. * Confirm the signal source device is on and functioning. * Check all cable connections to ensure they are secure. * Verify that the computer's output resolution is supported (refer to Supported input signal resolution on page 48 and Troubleshooting on page 49). * Confirm that the DVD or Blu-ray player's output resolution is supported (refer to Supported input signal resolution on page 48 and Troubleshooting on page 49).
Z
Zachary HolderAug 18, 2025
How to fix no sound on BenQ Monitor?
- D
  Diana DiazAug 18, 2025
  If there is no sound from your BenQ Monitor, check these things: * Make sure the mute function is off on both the display and the input source device. Also, check that the volume isn't set too low. * Check all cable connections to make sure they are properly connected.
S
Savannah MartinezAug 26, 2025
Why is my BenQ Monitor remote not working?
- R
  Richard HallAug 26, 2025
  If the remote control for your BenQ Monitor isn't working, consider these potential solutions: * Ensure the remote control function is unlocked. * Verify the batteries are correctly oriented. * Check if the batteries are dead and replace them if necessary. * Make sure you are within the appropriate distance and angle from the display. * Ensure the remote control is pointed directly at the display's sensor. * Remove any obstructions between the remote control and the sensor. * Confirm the sensor is not exposed to strong fluorescent lighting or direct sunlight. * Turn off any nearby devices that transmit infrared signals, as they may cause interference.
A
anormanSep 2, 2025
What to do if computer image looks strange on BenQ Monitor?
- J
  Jennifer WilsonSep 2, 2025
  If the computer input image looks strange on your BenQ Monitor, ensure that you have selected a supported output resolution on the computer. Refer to Supported input signal resolution on page 48 and Troubleshooting on page 49 to select a supported resolution.