18 How to assemble your monitor hardware
Orient and align the stand arm with the monitor ( ),
push them together until they click and lock into place
().
Gently attempt to pull them back apart to check that
they have properly engaged.
Carefully lift the monitor, turn it over and place it
upright on its stand on a flat even surface.
You might want to adjust the monitor stand height. See
Adjusting the monitor height on page 23 for more
information.
Your monitor is an edge-to-edge monitor and should be
handled with care. Avoid finger pressure on the screen
surface. Adjust the screen angle by placing your hands on the
top and on the bottom of the monitor as illustrated.
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
2
To Next Page
Loading...
Need help?
General
