20 How to assemble your monitor hardware
4. Connect the power cable to the monitor.
Pass the cable through the cable management hole on
the stand arm first.
Plug one end of the power cord into the socket labelled
on the rear of the monitor. Do not connect the
other end to a power outlet just yet.
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power
outlet and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button on
the monitor.
Turn on the computer too, and select an input source
by the OSD control keys. The displayed input icons vary
depending on the available video inputs of the purchased
model.
To extend the service life of the product, we recommend
that you use your computer's power management function.
To Next Page
Loading...
Need help?
General
