EasyManua.ls Logo

BenQ BL902TM - Adjusting the monitor stand height

BenQ BL902TM
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11 How to assemble your monitor hardware
Adjusting the monitor stand height
If you prefer to lower the monitor stand height, push the
stand downward while holding both left and right sides of
the monitor.
Avoid placing hands near the bottom of the monitor stand
as the descending stand might cause personal injuries.
Keep children out of reach of the monitor while performing
this operation.
To extend the monitor stand to a higher position, press
the lower part of the height release on the stand while
holding the bottom of the monitor at the same time. And
pull the stand and the monitor upward together to the
desired height.
If the height release in the proceeding operation cannot
be pressed down, press the top of the monitor once as
illustrated on the right before you proceed.
Height release

Related product manuals