BenQ DC 2410 User Manual

BenQ DC 2410 User’s Manual
7
Working Mode
3.1. Recording Mode
Please set the Mode Dial at Recording Mode ( ) before setting up
the below functions.
I. Set Up Focus Range
Before you take pictures, please make sure you set the Focus
Switch at the correct focus range or the image may not be clear.
II. Turn On or Turn Off the LCD Display (Preset at On status)
III. Set Up Flash Mode (Preset at Auto Flash mode)
There are five flash modes as below:
a. Auto flash( ): The camera will judge the necessity of using the flash. If the
environment is too dark the flash will fire automatically.
a. Macro ( ): 0.2m.
b. Normal( ): 0.8m~infinity.
You can change the icon display on the
TFT LCD Monitor, turn it off, and turn
it on again by pressing the LCD button
in order.
You can change the flash mode shown
below according to the environment.

BenQ DC 2410 Specifications

General

Brand	BenQ
Model	DC 2410
Category	Digital Camera
Language	English