BenQ DC 2410 - Setup Mode Operations

BenQ DC 2410 User’s Manual
21
3.4. Set Up Mode
Please set the Mode Dial at Set Up Mode ( ).
I. Set Up Beep Sound (Preset at On)
II. Set Auto Power Off (Preset at 2 minutes)
Step : To enter the setting mode.
Step : To select and enter the option.
Step : To select and confirm the option.
Step : To escape the setting.
Step : To enter the setting mode.
Step : To select and enter the option.
Step : To select and confirm the option.
Step : To escape the setting.