BenQ DC C420 - Getting Started; Turning the Power on; off; Choosing the Screen Language; Setting the Date and Time

BenQ DC 5530 User’s Manual
English
Using the DC C4206
3.3 Getting started
3.3.1 Turning the power on / off
•
Press the [ ] button until the digital camera turns on.
• To turn the power off, press the [ ] button again.
3.3.2 Choosing the screen language
When the camera is turned on for the first time, a language-selection screen will be displayed
on the LCD monitor. Follow the steps below to choose the desired language.
1. Rotate the mode dial to [ ] mode, and then press the [ ] button to turn on your
camera.
2. Press [ ] to select the [CUSTOM] menu.
3. Use [ ] to select [LANGUAGE], and then press the OK button.
4. Use [ ] or [ ] to select the language you want.
5. Press the OK button to confirm.
3.3.3 Setting the date and time
Follow the steps below to set the date display style, current date and time.
1. Rotate the mode dial to [ ] mode, and then press the [ ] button to turn on your
camera.
2. Press [ ] to select the [CUSTOM] menu.
3. Use [ ] to select [DATE & TIME].
4. If you wish to switch the date types, press [ ] or [ ], and then press the OK button.
5.Press [] / [] to select Year, Month, Day and Time fields.
• To increase a value, press [ ].
• To decrease a value, press [ ].
• The time is displayed in 24 hour format.
6. Press the OK button after all fields are set.
DC_C420_UM.book Page 6 Wednesday, June 22, 2005 5:49 PM