BenQ DC C420 User Manual

BenQ DC 5530 User’s Manual
English
Using the DC C420 9
3.3.7 Burst
This mode is used for continuous shooting. Pictures are taken continuously while the shutter
button is pressed.
1. Rotate the mode dial to [A], [P], [ ], [ ], [ ] or
[ ], and then press the [ ] button to turn on your
camera.
2. Press [ ], and then use [ ] to select the [FUNCTION]
menu.
3. Use [ ] to select [CAPTURE MODE], and then press the
OK button.
4. Use [ ] or [ ] to select [BURST], and then press the
OK button.
5. To exit from the menu, press the [ ] button.
The [ ] indicator is displayed on the monitor screen.
6. Press the shutter button halfway to lock the focus.
7. Press the shutter button all the way down to shoot.
Shooting will stop when the shutter button is released.
• In Burst mode, the flash mode will be set to OFF automatically.
3.3.8 Auto exposure bracketing (AEB)
In this mode, the camera automatically changes the exposure within a set range to take three
shots after you press the shutter button once. AEB settings can be combined with exposure
compensation settings to extend the adjustment range.
1. Rotate the mode dial to [A], [P], [ ], [ ], [ ] or
[ ], and then press the [ ] button to turn on your
camera.
2. Press [ ], and then use [ ] to select the [FUNCTION]
menu.
3. Use [ ] to select [CAPTURE MODE], and then press the
OK button.
4. Use [ ] or [ ] to select [AEB], and then press the OK
button.
5. To exit from the menu, press the [ ] button.
The [ ] indicator is displayed on the monitor screen.
6. Press the shutter button to shoot.
• In AEB mode, the flash mode will be set to OFF automatically.
PICTURE FUNCTION
2 / 3
AUTO
CAPTURE MODE
BURST
SINGLE
X1
AEB
2 / 3
PICTURE FUNCTION
2 / 3
AUTO
CAPTURE MODE
BURST
SINGLE
X1
AEB
3 / 3
DC_C420_UM.book Page 9 Wednesday, June 22, 2005 5:49 PM

BenQ DC C420 Specifications

General

Brand	BenQ
Model	DC C420
Category	Digital Camera
Language	English