BenQ DC 5530 User’s Manual
English
Troubleshooting 23
The camera does not
shoot even when
pressing the shutter
button.
The battery is running low. Recharge your batteries or replace
with new batteries.
The camera is not in Shooting
Mode.
Switch to Shooting Mode.
The shutter button was not pressed
all the way down.
Press the shutter button all the way
down.
The internal memory or memory
card does not have any free space.
Load a new card or delete unwanted
files.
The flash is recharging. Wait until the flash mode icon, indi-
cated on the screen, stops flashing.
The camera does not recognize the
memory card.
Format the memory card before the
initial use or before using with
another camera.
Symptom Cause Solution
DC_C420_UM.book Page 23 Wednesday, June 22, 2005 5:49 PM
To Next Page
Loading...
Need help?
General
