BenQ DC 5530 User’s Manual
English
Preparing Your DC C51 for Use
7
To remove the SD card, make sure the camera is off. Open the battery/SD card cover. Press
lightly on the edge of the card and it will eject.
2.3 Attaching the Strap
To prevent accidentally dropping the
camera when using it, always use the strap.
1. Thread the small loop of the hand strap
through the strap eyelet on the camera
(A).
2. Pull the large loop through the small loop
until the strap is firmly secured (
B
).
Notes
•
To prevent valuable data from
being accidentally erased from an
SD card, slide the write-protect tab
(on the side of the SD card) to
"LOCK".
• To save, edit, or erase data on an
SD card, you must unlock the
card.
• Format your SD card before use. Refer to 3.4.1“Memory” on page 20.
ړ
MB
L
O
C
K
Write-protect tab
Press the tab in the
direction of the arrow
on the card to write
protect the SD card.
A
B
To Next Page
Loading...
Need help?
General
