English
Using the Camera 9
3.3.8 Auto exposure bracketing (AEB)
In this mode, the camera automatically changes the exposure within a set range to take three
shots after you press the shutter button once. AEB settings can be combined with exposure
compensation settings to extend the adjustment range.
1. Rotate the mode dial to [A], [P], [ ], [ ], [ ] or [ ], and then press the
[ ] button to turn on your camera.
2. Press [ ] to select [ ].
3. Press the shutter button to shoot.
• In AEB mode, the flash mode will be set to OFF automatically.
3.4 Menu options
3.4.1 Camera menu
This menu is for the basic settings to be used when capturing still images.
1. Rotate the mode dial to [A], [P], [ ], [ ], [ ] or [ ], and then press the
[ ] button to turn on your camera.
2. Press [ ], and then use [ ] / [ ] to select [Mode 1], [Mode 2], or [Mode 3].
• In [A] Mode, press [ ] to access menu directly.
3. Press [ ] or [ ] to select the desired setting, and then press the OK button.
4. To exit from the menu, press the [ ] button.
In [A] mode:
Item Functional Description
Image Size
[]
This option sets the size of the image that will be captured.
– [ ] 2816 x 2112
– [ ] 2272 x 1704
– [ ] 1600 x 1200
– [ ] 640 x 480
Quality
[]
This option sets the quality (compression rate) at which the image will be captured.
– [ ] Fine
–[ ] Normal
– [ ] Economy
Q
DC_C630_UM.book Page 9 Tuesday, February 14, 2006 10:01 AM
To Next Page
Loading...
Need help?
General
