English
Touring Your Camera2
• If your BenQ camera’s lens remains extended after an involuntary shutdown, simply
replace the batteries with new ones and restart your camera. Never forces the lens
inwards since this action will damage the camera and void the BenQ Warranty.
1.2.2 Rear view
1.2.3 LED indicators
• It is normal for the camera to become warm during operation, because camera casing can
conduct heat.
• The LCD display on this camera is manufactured with sophisticated technology, and more
than 99.99% of the pixels on the LCD display meet standard specifications. Yet, it is
possible that less than 0.01% of the pixels on the LCD display may have some light spots
or show unusual colors. This is normal and does not indicate display malfunction, nor will
this affect the pictures you take with the camera.
Indicator State Description
Status LED
No light The digital camera is off.
Solid green The digital camera is ready to capture images.
Blinking
green
The digital camera is powering on, cannot focus, record
video clips, or is in the power-saving mode.
The camera/flash is charging, or the USB
communication/transfer is in progress.
Self-timer LED Blinking red The self-timer function is activated.
1. LCD monitor
2. W
Zoom-out or thumbnail
3. T
Zoom-in
4. Strap eyelet
5. REC or PLAY mode
6. Menu
7. Status LED
8. Navigator -- four-way
control and OK
9. Scene mode
10. Av/Tv/M Aperture priority,
Shutter priority, or Manual)
in the REC mode, or Delete
image/video in the PLAY
mode
DC_C750_C850_UM.book Page 2 Friday, March 28, 2008 5:13 PM
To Next Page
Loading...
Need help?
General
