To Next PageTo Next Page
Need help?Do you have a question about the BenQ DC E1030 and is the answer not in the manual?
General| Image Sensor | CCD |
|---|---|
| Sensor Resolution | 10.1 Megapixels |
| Sensor Type | CCD |
| Optical Zoom | 3x |
| Digital Zoom | 4x |
| LCD Screen | TFT LCD |
| Video Recording | Yes |
| Video Resolution | 640 x 480 |
| Storage | SD/SDHC |
| Battery | Li-ion Battery |
| Type | Compact Digital Camera |
| Effective Pixels | 10.1 MP |
| Image Sensor Size | 1/2.3-inch |
| ISO Range | Auto, 100, 200, 400 |
| Shutter Speed | 1/2000 to 1/2 sec |
| Storage Media | SD/SDHC card |
Lists terms that are trademarks of BenQ Corporation.
Details EU RoHS directive and its application to products sold in the EU.
Provides essential safety precautions for service personnel working with the product.
Outlines the three service levels covered by this manual.
Provides links to BenQ's official support websites for further assistance.
Introduces the specific product model covered in the manual.
Refers to specification and packing details relevant to Level 1 service.
General guidelines and initial steps for disassembling the camera.
Instructions for removing strobe, UI, and main boards from the camera.
Steps to remove the UI board, including its mylar and connections.
Procedures for disconnecting and removing the main board from the camera.
Steps for removing the LCD panel, lens assembly, and chassis components.
Visual diagrams and a list of camera parts with their respective numbers.
Steps to access and display the camera's current firmware version.
Procedure for updating the camera's firmware using an SD card.
Detailed instructions for firmware update using PC software and a special cable.
Procedures for performing auto calibration and infinite focus tests.
Procedure for calibrating the camera's flash White Balance.
Steps to set and test the camera's USB connectivity mode.
Lists necessary tools and precautions before commencing troubleshooting.
Diagnoses and solutions for the camera failing to power on.
Troubleshooting steps for issues related to the camera's LCD display.
Diagnoses and solutions for malfunctions related to the camera's flash unit.
Addresses other common defects like sound issues, recording problems, and SD card errors.
