English
Using the DC E60018
4. To exit from the menu, press the [ ] button.
Icon Item Option Functional Description
[]
Protect
[]
Sets the files to the read-only status to prevent them from
being erased by mistake.
To protect your files, follow the steps below.
1. Press [ ] when the [Protect] menu is displayed.
2. You can choose to protect or unprotect the files as
follows.
– Choose [Protect One] and press the OK button to
protect the current selected file. If you wish to can-
cel protecting the current file, choose [Unprotect
One] and press the OK button.
– Choose [Protect All] and press the OK button to
protect all the files. If you wish to cancel protecting
all the files, choose [Unprotect All] and press the
OK button.
– To quit the menu, press [Exit].
An icon will be displayed if the file is
protected.
[]
Tr im
[]
Allows you to trim a portion of a captured image.
To trim a captured image, follow the steps below.
1. In Playback Mode, choose Trim and then press
[].
2. Use the zoom key and [ ]/[ ]/[ ]/[ ]
buttons to move to the portion you want.
3. Press the OK button.
A trimmed image will be saved as another
file and has a smaller size.
[]
Slideshow
[] 1 sec.
[] 3 sec.
[] 5 sec.
This function enables you to set the time interval while
playing back your images automatically in sequential order
as a slide show. This is a very useful and entertaining fea-
ture for reviewing captured images and for presentations.
Once you select an option, the slideshow will begin imme-
diately. If you wish to stop, just press the OK button.
[]
Resize
[ ] 2048 x 1536
[ ] 1600 x 1200
[ ] 1280 x 960
[ ] 640 x 480
Allows you to change the size of a captured image.
To resize a captured image, follow the steps below.
1. In Playback Mode, choose Resize and then select the
desired option.
2. Press the OK button.
A resized image will be saved as another file
and has a smaller size.
DC_E600_UM.book Page 18 Wednesday, February 8, 2006 10:04 AM
To Next Page
Loading...
Need help?
General
