BenQ DC E820 User Manual

English
Using the Camera 11
3.4.2 Using the menus
When a menu is displayed, the four-way control and the OK button are used to make the
desired settings.
1. Turn the power on, and set the camera to the REC mode.
2. Press the MENU and then press the [ ] / [ ] to select the REC menu.
3. Press [ ] / [ ] to select a menu item and then press [ ] or the
OK button to launch
the submenu.
4. Press [ ] / [ ] to select an option and press the
OK button to apply the setting.
5. Press the
MENU button to close the menu.
3.4.2.1 REC menu list (still image)
3.4.2.2 REC menu list (movie)
Menu item Available settings
Resolution
/ / / / / /
Quality
/ /
Metering
/ /
White Balance
/ / / / / /
ISO
/ / / / / /
Exposure -2.0 EV ~ +2.0 EV
Drive Mode
Off / / / /
AEB Off / On
Highlight
Off / / /
Sharpness
/ /
Effect Normal/ B&W / Sepia / Negative / Red / Green / Blue
Date Stamp Off / Date / Date & Time
Stabilizer Off / On
Face Tracking Off / On
Photo Frame Off / 1-10 frames
Digital Zoom Off / On
Menu item Available settings
Movie Size
/ / /
1000
2
10
DC_E820_UM.book Page 11 Tuesday, May 15, 2007 4:43 PM

BenQ DC E820 Specifications

General

Brand	BenQ
Model	DC E820
Category	Digital Camera
Language	English