English
Using the Camera12
3.4.3 Setup menu
1. Turn the power on, and set the camera to the REC or PLAY mode.
2. Press the
MENU, and then press the [ ] / [ ] to select the Setup menu.
3. Press [ ] / [ ] to select a menu item and then press [ ] or the OK button to launch
the submenu.
4. Press [ ] / [ ] to select an option and press the OK button to apply the setting.
5. Press the
MENU button to close the menu.
3.4.3.1 Setup menu list
Metering
/ /
White Balance
/ / / / / /
Menu item Functions
Sounds [Shutter] Sets the shutter sound on and off.
[Start-up] Sets a type of the start-up sound.
[Beep] Sets the operation sound on and off.
[Volume] Adjusts the volume of the shutter sound, start-
up sound, beep and playback sound.
Auto Review [Off] The captured image will not automatically
display after shooting.
[3 sec.] The captured image will display for 3 seconds
after shooting.
[5 sec.] The captured image will display for 5 seconds
after shooting.
Power Save [1 min.] For power consumption, the camera is turned
off automatically for a period of time.
[3 min.]
[5 min.]
Date & Time Sets the date & time.
Language Select a language for display menus and other information.
Menu item Available settings
DC_E820_UM.book Page 12 Tuesday, May 15, 2007 4:43 PM
To Next Page
Loading...
Need help?
General
