Application instructions14
6. Noise Reduction Setting: Move the pointer to NOISE REDUCTION in the Menu,
click “HOME” and enter the (NOISE REDUCTION) as follows:
7. Version: Move the pointer to VERSION.
8. Restore Default: Move the pointer to RESTORE DEFAULT in the Main Menu, click
“HOME” and enter RESTORE DEFAULT as below:
Yes/No for options (the video format and color style won't be restored).
No. Name Descriptions
2D Noise Reduction Auto, close, 1~7
3D Noise Reduction Close, 1~8
Dynamic Hot Pixel Close, 1~5
If the address of the former remoter is not 1 but another one from 2,3,4, the corresponding
camera address will restore to 1 when all parameters or system parameters are restored. Users
should change the remoter address to be 1 (press No.1 according to the camera so to get normal
operation).
To Next Page
Loading...
